Ref: SLW38294
This course aims to introduce you to metal forming by raising, forging and scoring hollow work, flatware or boxes. Those with more experience have the opportunity to develop these skills further.
You will learn a range of techniques through demonstration and individual tuition. This course is primarily focused on hammer work, forming over a pre-shaped former, scored and formed, assembly of pre-formed sides, press forming, chasing and repoussé. Estimating of materials, the properties of metals, use of necessary tools, use of the gas torch for annealing and soldering and procedures for metal finishing will also be covered.
Beginners should be able to accomplish a simple hinged box, bowl or spoon. Advanced students will be able to develop their skills further.
The materials available to work with are silver, gilding metal and copper.
Please email the tutor in advance of the course via: [email protected] to discuss the project you would like to do on the course.
Some saw blades, shared by the group
Please email the tutor in advance of the course via: [email protected] to discuss the project you would like to do on the course.
You will need to purchase silver or copper to complete your project; this can be purchased from the College Shop, or in advance from a supplier.
Sketchbook with a range of possible ideas
8" 2nd cut pillar file (may be borrowed from the College)
8" 2nd cut ½ round (may be borrowed from the College)
An apron, hair tie (if needed) and stout covered shoes
Available from shop: Silver can be purchased from the College Shop, which stocks a range of sheet, wire, rod, tube and findings. These will be available in set sizes and lengths, suitable for a wide range of projects. A 120mm bowl will cost approximately £110 in 1mm Britannia Silver sheet.
Recommended bullion suppliers: Argex Ltd, Metalor Ltd, Cookson Precious Metals, Michael Bloomstein. Please note: some bullion suppliers have minimum order levels (e.g. £25). Please ask for your requirements to be checked against this before placing an order.
Please wear appropriate clothing/aprons for the workshop or studio. This includes stout covered footwear, i.e. no open-toes or sandals. Please tie hair back, if long.
Arrival day
Residential students can arrive from 4pm, non-residential students to arrive by 7.15pm for registration. Students arriving earlier are welcome to purchase dinner in the College Dining Room from 6pm.
Students meet their tutor in the Bar at 7.30pm prompt to go to studios.
First Teaching session: 7.30pm - 9pm (attendance is essential)
Daily timetable
Course teaching: 9.15am - 5pm
Morning session: 9.15am - 12.45pm including coffee/tea break
Lunch break: 12.45pm - 2pm*
Afternoon session: 2pm - 5pm including coffee/tea break
Teaching finishes: 5pm
Evening working: students may have access to workshops until 9pm, but only with permission from the tutor and provided any health and safety guidelines are observed.
Departure day
Course teaching: 9.15am - 3pm
Teaching finishes: 3pm
Residential students will need to check out of rooms by 10am. Please note, the tutor may make slight variations to the daily timetable as required.
*Lunch can be purchased on campus, view options
Julian Stephens has been a practicing silversmith and jeweller for the past 25 years. He has taught at Pruden and Smith in Ditchling and then at his own workshop in Brighton where he has run his own successful goldsmithing business since 2003. He is a member of the British Jewellers Association.
Residential option available. Find out accommodation costs and how to book here.
Our Foundation Degree in Metalwork will enhance your employment prospects, give you the skills to set up as a self-employed craftsperson or allow you to continue to higher education. Encompassing both silversmithing and blacksmithing, you will learn practical skills, material properties, placing your work in a broader context and historic metalworking techniques. Find out more
