Included
The college will supply all new stock metal and fuel. The forge is well stocked with hand and small power tools for you to use.
Goggles or safety specs (which must be worn), leather aprons, work gloves, welding helmets and ear defenders are provided.
If you have particularly large or small hands, your own leather work gloves are likely to be a better fit so bring them along.
What students need to bring
Please bring a few suitable pieces of scrap steel with you as a starting point. For the most part, these should be made from ferrous metal (steel that is magnetic), as non-ferrous metals such as brass, aluminium and zinc can be bolted together but are difficult to weld. Perhaps you have old tools and implements from your garden shed that might otherwise be thrown away.
Ideas for suitable scrap items include washers, chains, saw blades, pliers, window stays, old garden tools, trowels, or anything with an unusual profile or form. Even tin cans are great for cutting up and adding detail.
Rusty, pitted material can also be very texturally interesting, but it will require some time to clean and grind if you wish to weld it.
Please also bring:
- Sketchbook and pen
- Working clothes (cotton or wool clothing is preferable to synthetic fabrics)
- High-visibility vest for the scrap yard
- Steel toe-capped safety boots
- Water bottle
For your safety, it is mandatory to wear steel toe-capped safety boots when undertaking a course in the forge. You must bring your own footwear to wear on the course. If you fail to bring suitable footwear, you will not be able to take part. Safety boots can be purchased from most tool hire shops, builders’ merchants, and online.
You must wear safety specs/goggles (provided) and suitable protective clothing for this course. Leather aprons, gloves, welding gauntlets, goggles, welding helmets and ear defenders can either be borrowed from the forge or brought with you if you already have them.
Available to buy
Available from the Gardens Gatehouse Shop: A good variety of drawing equipment including sketchbooks and pens.
Additional information
Please note: This course will be in the Forge, which is a 10-minute walk from the main house through the walled garden or can be accessed by car.
As this course is held in the Forge, morning coffee and afternoon tea will be held in the nearby Carrington Studio.
Please note that tutor supervision is always required when you are working in the Forge and it will not be open when the tutor isn't there.
Please also note that this course requires some physical strength and you should be able to hold and use a medium sized hammer, tighten a vice efficiently to hold a piece of metal and stand for quite long periods between coffee and lunch breaks.