This course begins on Saturday morning and follows the standard content and sequence. Residential students only need to stay overnight on Saturday, as the schedule has been adjusted to finish later on Sunday with an extended afternoon session.

This course will introduce a range of techniques through a structure of tutor demonstration and student practice.

You will work on the following: detailed use of the fire, drawing down tapers in different cross sections, upsetting, bending in different cross sections, making spirals, different twisting techniques, various tools and techniques for shaping, curving and forming.

You may bring ideas or a project of your own or evolve an idea to work on, subject to the constraints of practicality and time, or combine techniques into different smaller scale objects as led and demonstrated and suggested during the course by the tutor. These are made following on from techniques demonstrated.

By the end of the course, you should have had a good introduction to the techniques of the blacksmith and you should feel more competent with understanding and recognising how these techniques are applied in decorative and sculptural metalwork. You should be able to confidently undertake further explorations of this fascinating and rewarding craft.

Included

On this course, the college will supply all of the materials required for the specific project set by the tutor, including all fuel costs and metal that is stocked by the college. Leather aprons, welding gauntlets, goggles, welding helmets and ear defenders can be borrowed from the Forge.

What students need to bring

You will need to wear clothing suitable for workshop use, together with steel toe capped boots. Please note that cotton or wool clothing is preferable to nylon or other synthetics. Shorts do not provide necessary protection. For your safety, it is mandatory to wear steel toe capped safety boots when undertaking a course in the Forge. You must provide your own footwear and bring them with you to wear on the course. If you fail to bring suitable footwear, you will not be able to take part in the course. Safety boots can be purchased from most tool hire shops and builders’ merchants, as well as online.

You must wear goggles (provided) and suitable protective clothing for this course. Leather aprons, welding gauntlets, goggles, welding helmets and ear defenders can be borrowed from the Forge or you can bring them along if you have them. If, for example, you have particularly large or small hands, your own leather work gloves are likely to be a better fit.

Available to buy

Available from shop:

• Sketchbook, pencil, rubber

Additional information

Please note: This course will be in the Forge, which is a ten-minute walk from the main house through the walled garden, or can be accessed by car. As this course is held in the Forge, morning coffee and afternoon tea will be held in the nearby Carrington Studio.

Please note that tutor supervision is always required when you are working in the Forge.

Saturday
Student registration: 9.45am  
Course teaching: 10am-5pm  
Morning session: 10am-1pm including coffee/tea break  
Lunch break: 1pm-2pm (lunch included)  
Afternoon session: 2pm-5pm including coffee/tea break  
Teaching finishes: 5pm  

Sunday
Course teaching: 9am-4pm  
Morning session: 9am-1pm including coffee/tea break  
Lunch break: 1pm-2pm (lunch included)  
Teaching finishes: 4pm  

Terms & Conditions